White Block Dock

The Block Dock^TM soap dish is made from aluminium and is powder-coated for a hardwearing finish. This clever storage solution is designed to drain quickly and to dry your bar fast - because air can reach all sides of it. Your bar will last longer and you'll get much more use from it. That's money in the bank because you will end up buying fewer bars - while also enjoying a better soap using experience. 

The Block Dock^TM safely stores all shapes, sizes and brands of bars and bars for every purpose.

This Block Dock^TM is WIDE size and weighs just 30 grams. It is 8.45cm wide, 5.6cm tall and 4.35cm deep. It fits bars up to 3.8cm in depth – the shortest side of your bar. 

The Block Dock^TM will keep your bar in good condition for use right to its very last sliver. When it’s that tiny, use it flat in your hand or piggy-back it onto your next bar when wet to avoid any waste.

ADHERES TO YOUR SHOWER WALL OR INSIDE YOUR BATH, BASIN OR SINK 

A suction cup comes with each Block Dock^TM soap dish to enable vertical mounting. Wet the back with water to activate it. Be sure to locate your Block Dock^TM outside of direct water spray! 

The suction cup WILL adhere to glass, mirror, acrylic, vitreous china, steel and most genuinely smooth tiles. It will NOT adhere to textured tiles, paint etc because the suction cup cannot form the vacuum it needs to work. If this is your situation, it is best to suction to nearby glass. You can use a Command^TM brand water resistant strip or Scotch^TM brand double-sided tape if it suits your surface. Additional holes in the back of the Block Dock^TM make it possible for you to thread a cable tie or stainless wire through for tying onto a shower rail or nearby fixture as an alternative.